Wireless LED lighting control gives you all the benefits of energy monitoring and reduction. A new solution, Light Brain™, makes it easier to create digital networks, where luminaires communicate wirelessly, controlled by an Android app or web interface. Simple software is available to design, optimise and extend the network.
Automated lighting networks can radically reduce energy consumption whilst delivering optimal lighting performance, where it is needed. Typical savings, when combined with Goodlight® LED luminaires are between 60-95%, depending on its application – ranging from commercial to industrial, education to healthcare and even hospitality!
A wirelessly connected system eliminates the disruption, cost and maintenance burden associated with hard-wired installations, whilst still allowing full control of the lighting system. The resulting system is at heart simple – yet infinitely scalable to the needs of the installation. From a single light fixture to thousands, within the same system, there is no upper limit.
New solutions like Light Brain™ make lighting networks a breeze to design as well as install and maintain. Software enables users to upload their floorplan – existing or proposed – for quick lighting layout creation, via easy-to-use ‘drag and drop’ tools. Once installed, Light Brain™ creates a digital network, where luminaires communicate wirelessly, controlled by Android app or web interface, with simple software.
Setting or adjusting the lighting can be achieved without any wiring changes. Luminaires can be added or replaced, and re-configured at the touch of a button – ideal when refurbishing or adapting internal layouts – and without any expensive re-commissioning.
Light Status Monitoring & Maintenance
An extensive status monitoring dashboard provides on-demand reports of the ‘health’ of LED sources and drivers, highlighting any critical failure points that need attention.
For those involved in providing lighting support to sites, for example facility managers, the solution caters for ‘active’ maintenance support, in addition to delivering ‘reactive’ lighting maintenance solutions fast and effectively. Neither of these functions require maintenance teams to carry out surveys or make visits to the relevant site.
In addition to its routine maintenance capabilities, Light Brain™ provides automation of routine emergency light testing and maintenance requirements, for example with self-test features for emergency lighting. Without the need to attend site and test individual light fittings, users are alerted to faults as and when they occur. With logging and fault recording functionality, it eliminates the need for manual recording.
Measuring success and progress
Reporting on the energy consumption of all connected lighting fixtures allows analysis and measurement of a single site, or all the sites being managed. This makes the Light Brain ideal for reviewing the energy performance of multi-site portfolios. Energy and facility managers can log in to review data from any site location as little or as often as needed.
A major advance of this integrated solution is that it can be applied to new builds, retrofits, old and new lighting. Light Brain modules are connected during the LED lighting upgrade, saving the time and costs of an additional lighting control installation. Because the technology is retrofittable – any luminaire and even individual lamps can be replaced with new LED and wireless-enabled luminaires. Integrate with non-LED luminaires, to make them smart too! All data can be monitored via the Android App (or remotely via web interface) or downloaded for easy analysis.
The savings can be substantial. Operating your lighting where it is needed – rather than at 100% brightness constantly – not only minimises energy consumption, but also extends lighting lifecycles and reduces maintenance costs. Example cost savings for a distribution centre fitted with LED lighting and Light Brain are around 87% with a payback of less than two years.
What is more, Light Brain™ qualifies for government schemes such as the Carbon Trust Green Business Fund. By claiming 100% first year capital allowance, through the Enhanced Capital Allowances Scheme (ECA), installers can offset the cost of Light Brain, and LED luminaires, and their installation.
Telephone: +44 01276 691 230